walton primo em2 flash file without password free SC7731E_eMMc_RS
Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : OPM2.171019.012
Display ID : OPM2.171019.012 release-keys
Ver. Incmt : 1557892468
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-05-05
Build Time : 15.05.2019
Product Info : y400
Product Model : Primo EM2
Product Brand : WALTON
Product Name : Primo_EM2
Product Device : Primo_EM2
Product Manfct : WALTON
Product Board : WALTON
Board Platform : sp7731e
Platform Version: MOCORTM_17C_W18.23.4_P2_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.23.4_P2
HW Version: sc7731e_modem
MODEM TAG : MOCORTM_17C_W18.23.4_P2_Debug_FM_BASE_17C_W18.23.4_P2_sc7731e_modem_pike2_pub
USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:53
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Forced [ Format FS / Fix ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!
Boot Done!
Wipe Ok : Forced Wipe
Wipe Ok : Forced Wipe
Reconnect Power/Cable!
Done!
Elapsed: 00:01:15
Operation : Read FW [ v2.14 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : OPM2.171019.012
Display ID : OPM2.171019.012 release-keys
Ver. Incmt : 1557892468
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-05-05
Build Time : 15.05.2019
Product Info : y400
Product Model : Primo EM2
Product Brand : WALTON
Product Name : Primo_EM2
Product Device : Primo_EM2
Product Manfct : WALTON
Product Board : WALTON
Board Platform : sp7731e
AndroidVer : 8
VlnrLevel : 0x00
SP7731E__WALTON__Primo_EM2__8.1.0__OPM2.171019.012__y400
Read : prodnv.img
ExtSparse : Compression ratio : 100%
Read : phase.cfg
Read : recovery.img
Read : tos.bin
Read : sml.bin
Read : u-boot.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : nvitem_w.bin
Make : persist.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : modem_wcn.img
Read : modem_w.bin
Read : deltanv_w.bin
Read : gdsp_w.bin
Read : pm_sys.bin
Read : boot.img
Read : system.img
ExtSparse : Compression ratio : 84%
Make : cache.img
Read : vendor.img
ExtSparse : Compression ratio : 48%
Read : vbmeta.img
Make : userdata.img
Read : u-boot-spl.bin
Firmware size : 0x5A49F7E0 ( 1.41 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!
Done!
Elapsed: 00:12:53
No comments:
Post a Comment